An ice maker that stops producing, makes small or misshapen cubes, or leaks water can be surprisingly frustrating. Whether yours is built into a refrigerator or a standalone unit, our technicians diagnose ice maker problems accurately and carry the most common replacement parts on every service call.
Common Ice Maker Repair Problems We Fix
No Ice Production
The most common causes are a frozen water line, a faulty water inlet valve, a clogged water filter reducing flow, or a failed ice maker module. We test water pressure, inspect the fill tube, and check the module to identify the exact failure.
Small, Hollow, or Misshapen Cubes
Ice that's too small, hollow in the center, or oddly shaped usually means insufficient water flow. A partially clogged water filter, low household water pressure, or a failing inlet valve restricts the amount of water reaching the ice mold.
Ice Maker Leaking Water
Water leaking inside the freezer or onto the floor can come from a cracked fill cup, a misaligned fill tube, a leaking water inlet valve, or a frozen drain line directing defrost water where it shouldn't go.
Ice Tastes Bad
Off-tasting ice is usually caused by an old water filter (change every 6 months), food odors absorbed by ice in the bin, or stale ice that's been sitting too long. If the problem persists after filter replacement, the water line may need flushing.
Ice Maker Overflows
An ice maker that keeps making ice until it overflows has a faulty optical sensor or a stuck shut-off arm. The sensor that tells the maker to stop producing isn't detecting a full bin.
Brands We Service
We repair ice makers from Samsung, LG, Whirlpool, GE, KitchenAid, Sub-Zero, Scotsman, and U-Line. Both built-in refrigerator ice makers and freestanding ice machines.
Ice Maker Repair Cost in Woodbridge, VA
| Repair Type | Estimated Cost |
|---|---|
| Water inlet valve | $80 - $160 |
| Ice maker module | $100 - $220 |
| Fill tube / cup repair | $60 - $120 |
| Water filter replacement | $30 - $70 |
| Water line repair | $80 - $150 |
| Sensor / shut-off arm | $60 - $130 |
* Our $89 diagnostic fee is waived when you approve the repair. For pricing context, review our complete appliance repair cost breakdown. Prices as of May 2026.
Frequently Asked Questions
The most common sudden failure is a frozen water fill tube. When the tube that feeds water to the ice mold freezes solid, no water reaches the ice tray. We thaw the line, identify why it froze (usually a faulty inlet valve or thermostat), and fix the root cause.
Every 6 months or after filtering 200-300 gallons of water. A clogged filter reduces water flow to the ice maker, causing small cubes or no production at all. It also affects water taste and quality.
Yes, most ice makers have a toggle switch, a swing arm, or a digital control to pause ice production. Consult your owner's manual for the specific method for your model. If the control is broken, we can repair or replace it.
Our Service Area
We provide ice maker repair throughout Northern Virginia including Woodbridge, Dale City, Lake Ridge, Dumfries, Manassas, Gainesville, Bristow, Lorton, Springfield, Fairfax, and all communities in the 571/703 area code.